Pacific Tiasa Wood Sdn Bhd – Red wood plywood and Kapur wood plywood is a multi-ply marine plywood that is superior to all standard redwood plywood and kapur wood plywood currently produced.

Both face and inner plies are constructed from whole piece, color matched, Meranti veneers.

Hydrotek is used in boat building applications where only the best will do. Hydrotek’s durable rating will ensure that you are using a marine plywood that will last.

Our teak face plywood is made by applying teak veneer to a marine plywood substrate, usually meranti.

The substrate plies are glued with WPB exterior glues while the teak veneer is glued with type I exterior glue.

Typical boat applications for the standard grade panel includes cabinets and interiors. It has also been used with good success for exterior applications as long as finishing instructions are followed to a T, however no warranty is available for this application.

Properties: Hydrotek has excellent machining properties as it can be easily sawn and bored leaving smooth edges. It also has good nailing and screw-holding properties and is easy to stain and glue. Hydrotek Redwood and kapur wood has superior durability and insulation properties.

Face Veneers: No structural defects allowed. Appearance grade face and back, color matched.

Core Veneers: All core veneers are comprised of whole piece veneers ensuring absolutely no core voids per BS 1088 rules.

Glue: WBP (phenolic) water proof , boil proof and Contact

%d bloggers like this: