Who is the largest plywood manufacturer in the USA?
Company size is a weak filter for shuttering plywood. US formwork crews buy a pour face (phenolic film, HDO, or MatteFace) with a named glue class and a reuse envelope written as up to N, not a ranked mill directory. A lumberyard sheet and a factory-direct container are not the same buy, even when both sit under a USA suppliers headline. Vinawood is a Vietnam mill, established in 1992, shipping about 5,000 containers a year to 55+ countries. Compare mills on overlay, bond class, and documents, not on brand fame.
What companies make plywood in the USA?
Domestic mills mainly press construction sheathing, OSB, and decorative hardwood. Film-faced shuttering, HDO, and MatteFace Plywood for concrete come from mills that press an overlay onto a plantation-grown hardwood core. Reach that stock factory-direct, through a Vinawood distribution warehouse that supplies local distributors, or at a retail lumberyard. Only the mill controls bond class on press day, so a ranked US mill list is the wrong sourcing map for an 18 mm shuttering take-off.
Where does the US get its plywood?
Softwood sheathing is largely domestic. Overlaid formwork panels for shuttering programmes are commonly imported. Vinawood ships film-faced, HDO, and MatteFace packs with CARB P2 / EPA TSCA Title VI documents, and keeps distribution warehouses in Miami, Houston, and Baltimore for ready stock through local distributors. Formwork and PS-structural families sit outside Vietnam hardwood CVD scope; confirm the SKU with your broker. Do not treat a ranked US mill list as the sourcing map for a pour face.
How do I choose a plywood supplier?
Write mill versus trader first, then the RFQ fields: mill test report, CARB P2 / EPA TSCA Title VI, EN 636 bond class, overlay (HDO Basic up to 10, HDO Premium up to 20, or MatteFace up to 15), thickness and 4 × 8 size, lead time, and 40-foot packing. Form Extra is Superior Glue MUF, EN 636-2, not Class 3. Pro Form Lite, Pro Form, and HDO are phenolic Class 3. Send the pack to /rfq or /contact.
Is it cheaper to import plywood or buy domestic?
It depends on volume and reuse, not a published sheet price. A few lumberyard sheets for a one-off footing favour local stock. A repeating wall or slab programme should be judged on cost per pour: landed panel cost divided by realised cycles. Vinawood quotes factory-direct containers and ready stock through local distributors from warehouses in Miami, Houston, and Baltimore. No dollar table belongs on this page.
What should a US shuttering plywood RFQ include?
Name the lane first: factory-direct container or ready stock through a local distributor. Then write the sheet, not a brand story: mill test report, CARB P2 / EPA TSCA Title VI, EN 636 bond class, overlay and reuse as up to N, 18 mm at 1220 × 2440 (4 × 8), lead time, and 40-foot packing. Form Extra is Superior Glue MUF, EN 636-2, not Class 3. If the spec says Class 3, stay on Pro Form Lite, Pro Form, or HDO.
