VinawoodVinawood *

「Plyform Plywood: APA Grades, Sizes & Contractor's Buying Guide」は日本語ではまだご利用いただけません

このページはまだ翻訳されておりません。以下より全てのブログをご覧ください。より多くのコンテンツを近日中に翻訳予定です。

全てのブログを見る

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Pro Form formwork panelExplore Vinawood's Pro Form panel, a high-performance film-faced formwork plywood engineered for demanding concrete pours.
MDO overlay formwork panelSee specifications for Vinawood's MDO 1SF panel, offering a smooth medium-density overlay surface for quality concrete finishes.
Glossy concrete finish plywoodBrowse formwork panels specifically designed to achieve smooth, glossy concrete surfaces on architectural projects.
Melamine vs phenolic overlay comparisonUnderstand the key differences between melamine and phenolic film overlays for formwork plywood and which performs better for your project.

Quick Answers

What is plyform plywood and how is it graded?
Plyform is a concrete-forming plywood panel manufactured to APA (Engineered Wood Association) standards. It comes in two main grades: Plyform Class I, which uses stronger Group 1 or Group 2 face species for higher reuse cycles, and Plyform Class II, which uses Group 3 or Group 4 veneers and is suitable for lighter-duty pours.
How many times can plyform plywood be reused?
Reuse depends on the grade and jobsite handling. Class I plyform with an HDO overlay can typically achieve 20–50 reuse cycles when properly cleaned and stored. Standard B-B plyform without overlay may last 5–10 pours before the surface degrades noticeably.
What thickness of plyform is best for concrete forming?
The most common thickness is 3/4 inch (19 mm), which provides adequate stiffness for wall and column forms with standard stud spacing. For slab formwork with wider joist spacing, 1-1/8 inch (28 mm) Structural I plyform offers greater span capacity and deflection resistance.
Can plyform plywood be used for architectural concrete finishes?
Standard B-B plyform produces a utilitarian surface with visible grain transfer. For architectural or fair-face concrete, HDO-overlaid plyform or film-faced formwork panels are recommended, as the resin overlay produces a smoother, more uniform concrete surface.