“Plyform Plywood: APA Grades, Sizes & Contractor's Buying Guide” ainda não está disponível em Português

Plyform is a concrete-forming plywood panel manufactured to APA (Engineered Wood Association) standards. It comes in two main grades: Plyform Class I, which uses stronger Group 1 or Group 2 face species for higher reuse cycles, and Plyform Class II, which uses Group 3 or Group 4 veneers and is suitable for lighter-duty pours.

Reuse depends on the grade and jobsite handling. Class I plyform with an HDO overlay lasts longest when properly cleaned and stored, while standard B-B plyform without overlay wears out sooner because the bare face degrades. For a figure, use the data sheet of the exact panel: Vinawood rates HDO Basic up to 10 and HDO Standard and HDO Premium up to 20.

The most common thickness is 3/4 inch (19 mm), which provides adequate stiffness for wall and column forms with standard stud spacing. For slab formwork with wider joist spacing, 1-1/8 inch (28 mm) Structural I plyform offers greater span capacity and deflection resistance.

Standard B-B plyform produces a utilitarian surface with visible grain transfer. For architectural or fair-face concrete, HDO-overlaid plyform or film-faced formwork panels are recommended, as the resin overlay produces a smoother, more uniform concrete surface.