What does concrete form plywood price actually mean?
Cost per pour, not a lumberyard sheet sticker. Add panel cost plus strip and clean labour for one cycle, then divide by reuse written as up to N on the mill card. Overlay, glue class, thickness, sheet size, and landed freight or duties move the number, but they do not erase the reuse math. A sheet list without a pour count is noise for a real form package.
How should US contractors choose grade for a footing versus a multi-storey wall?
Programme length comes first, not brand stamp. A residential footing or one-storey stem wall often needs only one or two pours, so entry film-faced grades with careful strip care beat paying for a Class 3 face the architect will never see. A multi-storey wall that strips the same gang fifteen to twenty times is where phenolic Class 3—Pro Form Lite, Pro Form, or HDO Premium—earns the landed premium, because early retirement hands grind and patch bills to the next trade.
How many times can you reuse concrete form plywood?
Reuse is up to N on the mill card, not a guarantee. Vinawood’s ladder runs Eco Form Plus up to 8, Form Basic up to 10, Form Extra up to 15 (Superior Glue MUF, EN 636-2, not Class 3), Pro Form Lite up to 15 (PF Class 3), and Pro Form or HDO Premium up to 20. Site care still steals cycles, so flat stacks, sealed cut edges, and release agent before rebar keep the card honest.
When does factory-direct import beat a yard walk-in?
Factory-direct makes sense when pour count and sheet count justify container planning and roughly six to eight weeks of lead time against the pour calendar. Big-box and walk-in yards stay fastest for a few repair sheets at the highest unit cost, while contractor accounts improve recurring mid programmes without leaving yard inventory. On a multi-storey wall that will burn through two or three container equivalents, the landed premium usually pays for itself in the first half of the reuse envelope if bond class and overlay were named correctly on the RFQ.
Is Vietnam concrete form plywood subject to anti-dumping duties?
Formwork plywood and PS-structural plywood are excluded from the Vietnam hardwood CVD order finalized 21 July 2026. That is not a blanket duty-free claim for every hardwood SKU. Confirm the product family on your PO with your customs broker, and do not treat MatteFace, HDO, or film-faced formwork as a tariff talking point on a price page.
What thickness of plywood is standard for concrete forms?
Eighteen millimetre (3/4") is the US contractor workhorse for wall and slab-edge forms on common stud spacing, and it lines up with 2×4 and 2×6 modules carpenters already stock. Twelve millimetre (1/2") shows up on light curb and edge work, while 21–25 mm earns its keep on high-pressure or wide-span decks. Millimetre-by-pour deflection detail belongs on the thickness guide, not on a price page that invents formulas.
