VinawoodVinawood *

« Imprinted Film-Faced Plywood: Manufacturer Marks, Custom Branding & Decorative Patterns » n'est pas encore disponible en Français

Nous n'avons pas encore traduit cette page. Parcourez tous nos Blog ci-dessous — nous traduisons davantage de contenu prochainement.

Voir tous les Blog

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Film-faced plywood collectionBrowse Vinawood's full range of film-faced phenolic formwork panels in multiple thicknesses and sheet sizes.
Pro Form premium phenolic panelVinawood's premium high-reuse film-faced panel with WBP phenolic adhesive (EN 636-3), rated for up to 20 pour cycles with a heavy phenolic film face that takes custom imprints cleanly.
Pro Form High Density (HDO architectural)Architectural-tier HDO formwork plywood for US-market distributors specifying patterned or imprinted panels for board-form concrete.
Anti-slip film-faced plywoodCompanion guide explaining the difference between anti-slip and imprinted film-faced plywood — anti-slip adds friction for worker safety, imprinted is decorative or for branding.

Quick Answers

Does an EN 636-3 imprint on the panel mean it's certified?
No. The imprint is the manufacturer's self-declaration. Certification is a separate process involving an independent test lab, with a test report naming the lab, sample size, pre-treatment cycle, and bond result. Always ask for the report behind the imprint.
Can I get my own logo printed on imported film-faced plywood?
Most reputable manufacturers offer this for distributor partners at container-quantity minimums. Setup costs are amortised across the order, lead time adds about a week, and the imprint quality is best on phenolic-coated panels with heavier film weights.
Will a wood-grain imprint on plywood transfer cleanly to concrete?
For shallow architectural patterns, yes. Typical depth is 0.3 to 0.8 mm in the film, which produces a soft visible texture in the cured slab. For deep relief textures, formliners (rubber or polyurethane sheets) are the better solution. Reuse on patterned panels drops after pour 6 to 8 as the pattern face wears.
Is imprinted plywood the same as anti-slip plywood?
No. Anti-slip uses a wire-mesh impression or sand coating to add friction for worker safety on sloped or wet panels. Imprinted is decorative or for branding. They serve different purposes, and a panel marked one way will not perform as the other.