“Construction Plywood Canada: CSA Standards, Grades & Sourcing Guide” non è ancora disponibile in Italiano

Canada uses CSA O121 (Douglas Fir plywood) and CSA O151 (Canadian Softwood plywood) as its national standards for structural plywood. APA PS 1-19 panels manufactured in the US are also widely accepted. For concrete formwork — which is a temporary structure — the critical requirement is WBP phenolic adhesive bond class rather than a specific national standard stamp. Imported panels with documented WBP adhesive performance are accepted for forming across Canadian provinces.

Yes, under the CPTPP (Comprehensive and Progressive Agreement for Trans-Pacific Partnership). Both Canada and Vietnam are signatories. Most Vietnamese plywood products qualify for 0% import duty with a valid CPTPP certificate of origin. The relevant HS codes are 4412.31 and 4412.39. Confirm current tariff classification with your customs broker before placing an order.

Ocean transit from Vietnam to Vancouver runs approximately 18 to 22 days. Transit to Montreal via the Suez Canal or Panama Canal takes 28 to 33 days. Halifax receives containers in approximately 25 to 30 days. Including production lead time of 15 to 25 days, total order-to-delivery is typically 5 to 8 weeks depending on destination port.

Yes. Film-faced plywood with WBP phenolic adhesive is widely used for concrete formwork across Canada. Because formwork is a temporary structure — removed after the concrete cures — it does not require CSA-stamped panels. The key requirements are adequate structural performance for the forming loads and a WBP adhesive bond that resists moisture throughout the pour and curing cycle.