VinawoodVinawood *

“3/4 plywood: Actual Sizes, Types and Common Uses”은(는) 아직 한국어에서 사용할 수 없습니다

이 페이지는 아직 번역되지 않았습니다. 아래의 모든 블로그을(를) 확인하세요 — 곧 더 많은 콘텐츠를 번역할 예정입니다.

모든 블로그 보기

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Plywood sizesStandard sheet dimensions and the nominal-versus-actual thickness gap across the range.
Plywood grades explained (A, B, C, D)How face-grade letters and bond class decide which 3/4" panel fits the job.
How to install a plywood subfloorThe glue-and-screw sequence for a 3/4" tongue-and-groove subfloor.
Hardwood vs softwood plywoodHow core species changes stiffness, weight and screw-hold at the same thickness.

Quick Answers

Is 23/32" the same as 3/4" plywood?
Yes. They are the same panel under two labels. 3/4" is the nominal (named) thickness and 23/32" is the actual milled thickness after sanding and finishing. The difference is about 1/32 of an inch, so the two are interchangeable for most uses.
What is the actual thickness of 3/4" plywood?
About 23/32", which is 0.71875" or roughly 18.26 mm. The full nominal 3/4" equals 19.05 mm, so the milled panel sits about 0.8 mm under its named size.
How many mm is 3/4" plywood?
Nominal 3/4" is 19.05 mm, but the actual milled panel measures about 18.26 mm (23/32"). Most suppliers round this to ~18 mm on metric spec sheets.
Does the 1/32" difference between 23/32" and 3/4" matter?
Not for subfloor, sheathing or general framing, where the two are interchangeable. It does matter for cabinet joinery, dado and rabbet fits, and flush transitions, where you should cut to the actual measured 23/32" thickness rather than the nominal name.