VinawoodVinawood *

„HDO vs MDO Plywood: A Complete Comparison for Builders and Contractors” nie jest jeszcze dostępny w języku Polski

Nie przetłumaczyliśmy jeszcze tej strony. Przeglądaj wszystkie nasze Blog poniżej — wkrótce przetłumaczymy więcej treści.

Zobacz wszystkie Blog

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Quick Answers

What is the difference between HDO and MDO plywood?
HDO carries a dense phenolic resin overlay that casts a glossy, closed concrete face and stands up to high pour counts. In formwork searches MDO usually means a matte cast face, and buyers often search for MatteFace as MDO formwork plywood; our product for that finish is MatteFace Plywood (MTF), made for formwork only. The kraft-paper MDO described by APA is a different sheet, built as a paint base for signs and exterior panels. Choose by the finish the drawing calls for and the number of pours you need.
Is HDO or MDO better for concrete forms?
For high-rotation gang forms or a glossy exposed face, HDO is usually the better start, because HDO Standard and HDO Premium are Class 3 and rated for up to 20 reuses with good site care. When the architect wants a matte face, MatteFace Plywood is the sheet buyers often search for as MDO formwork plywood: Panel 1S and 1SF are rated up to 15 uses, HD 1SF up to 17, and Panel 2S up to 25, all Class 3, while MatteFace Eco 1SF is Class 2 and rated up to 6. Put the finish and the pour count on the RFQ so the quote matches the job rather than the cheapest overlay.
How many times can HDO plywood be reused?
HDO Basic is rated for up to 10 reuses, while HDO Standard, HDO Premium and HDO Premium HD are rated for up to 20. Those figures are maximums, and crews reach them when cut edges stay sealed and release agent goes on thin before every pour. Panels dropped on their corners or stored flat on wet ground fall well short.
Can you paint MDO plywood?
Kraft-paper MDO, the APA overlay class, is made as a paint base and is common on signs and exterior panels. MatteFace Plywood is a matte phenolic forming film for concrete work, so it is not a paint-grade sheet. If the job is a pour, specify MatteFace or HDO by the finish you need; if it is a sign, kraft-paper MDO is the product to look for.
Does a denser overlay mean the panel is phenolic Class 3?
No, because the overlay and the glue in the core are separate parts of the specification. At Vinawood, Pro Form, Pro Form Lite, HDO Standard and HDO Premium are bonded with phenolic glue to EN 636-3 (Class 3), while HDO Basic is Class 2. MatteFace Panel 1S, Panel 2S, 1SF and HD 1SF are also Class 3, and MatteFace Eco 1SF is Class 2; a denser or matte face does not by itself make the bond Class 3. Write the overlay and the bond class as two separate lines on the RFQ.
What datasheet specs should a contractor check when buying HDO plywood for concrete formwork?
Check the overlay class, how many faces carry it, the thickness and sheet size, and the core bond class before you compare a price. An HDO formwork datasheet should say high-density overlay on one side or two (1S or 2S), name the thickness the forms are built around (often 18 mm or 3/4 inch in a 4-by-8-foot sheet), and state whether the glue line is phenolic Class 3 (EN 636-3) or a Class 2 bond. Vinawood rates HDO Basic for up to 10 reuses and HDO Standard and HDO Premium, both phenolic Class 3, for up to 20 reuses when cut edges stay sealed and release agent goes on thin before every pour. Ask for those lines in writing, plus how the edges are sealed and which documents travel with the shipment, so the quote matches the pour count and the finish rather than only the SKU name.