VinawoodVinawood *

Kolekcja

Płyta sklejki o matowej powierzchni betonu

Twórz idealne matowe wykończenia betonu dzięki sklejce MDO zaprojektowanej z myślą o trwałości i gładkiej, matowej powierzchni, zapewniając znakomite efekty betonowe.

0 produktów w tej kolekcji

Brak produktów w tej kolekcji.

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

MDO plywood guideEverything you need to know about MDO plywood — properties, pricing, applications, and how it compares to other overlay types.
Formwork plywood storage and maintenanceBest practices for storing and maintaining formwork panels to maximize reuse cycles and panel life.
MDO 1S panelVinawood's MDO single-sided overlay panel — a smooth, paintable surface for formwork and exterior signage applications.
Glossy concrete surface plywoodCompare matte and glossy formwork plywood options to select the right finish quality for your concrete project.

Quick Answers

What plywood produces a matte concrete finish?
MDO (Medium Density Overlay) plywood produces a smooth matte concrete finish. The fiber-based overlay transfers a subtle flat texture to the concrete surface, resulting in a non-reflective, uniform finish suitable for interior structural elements and concealed concrete work.
Is matte-finish formwork plywood cheaper than glossy?
Generally, yes. MDO plywood panels cost less than film faced or HDO alternatives because the medium-density fiber overlay is less expensive to produce than phenolic film or high-density resin overlays. However, MDO offers fewer reuse cycles (up to 5 to 15) compared to glossy-surface panels (up to 20 to 30+), so cost-per-use should be calculated for your specific project.
Can matte formwork plywood be used for exposed concrete walls?
MDO formwork plywood can be used for exposed concrete, but the result will be a flat, matte surface rather than a glossy, reflective one. This finish is often preferred for interior walls, soffits, and structural elements where a softer appearance is desired. For high-end architectural exposed concrete, glossy film-faced or HDO panels are the better choice.
How do I maintain matte-surface formwork plywood for maximum reuse?
Clean panels immediately after stripping using a plastic scraper — never metal tools that can damage the overlay. Apply a thin coat of form release agent before every pour. Seal cut edges with waterproof paint. Store panels flat on level bearers under cover. With proper care, MDO formwork panels deliver up to 5 to 15 reuse cycles.