VinawoodVinawood *

„Anti-Slip Film-Faced Plywood: Specs, Use Cases & How It's Made“ ist in Deutsch noch nicht verfügbar

Wir haben diese Seite noch nicht übersetzt. Durchsuchen Sie alle unsere Blog unten — wir übersetzen bald mehr Inhalte.

Alle Blog anzeigen

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Concrete form plywood pillar guideThe pillar reference for concrete formwork plywood — covers grades, bond classes, reuse expectations, and overlay choices across the global formwork range.
Phenolic plywood overviewBackground on phenolic-resin-bonded plywood and how phenolic film overlays cure during the hot-press cycle.
Formwork plywood storage and maintenanceCare, cleaning, and storage practices that extend reuse cycles for film-faced and anti-slip panels.
HDO vs MDO plywoodComparison of High-Density Overlay and Medium-Density Overlay panels — useful context for North American buyers comparing anti-slip film-faced to HDO surfaces.
Vinawood Pro Form film-faced panelVinawood's premium phenolic film-faced formwork panel (EN 636-3, 220 g/m² phenolic film) and the base specification for the Pro Form Anti-Slip variant.
Pro Form High Density variantHigher-density variant of Pro Form for premium reuse and heavier loads on working decks and high-traffic formwork tops.
Film-faced plywood collectionBrowse Vinawood's full range of film-faced phenolic formwork panels, available in multiple thicknesses, film weights, and surface textures.
HDO plywood collectionNorth American market HDO formwork range — phenolic-bonded panels with high-density overlay for premium concrete-forming applications.

Quick Answers

Does the anti-slip texture wear off?
Yes, gradually. The raised mesh ridges flatten under foot traffic and equipment loads over the panel's reuse life. The texture does not peel, chip, or shed — it's the cured shape of the phenolic film itself, not a separate coating. When the imprint flattens to roughly half its original depth, the slip-resistance benefit declines and the panel should be retired from anti-slip duty.
Can I paint over the anti-slip surface?
Yes, but it usually defeats the purpose — paint fills the mesh recesses and reduces grip. If a colour-coded working surface is required, request the panel with a tinted phenolic film rather than painting over a standard panel.
What's the slip-resistance rating?
The texture provides engineered slip resistance, but specific coefficient of friction values vary by film weight, texture depth, surface state, and footwear material. Request mill test reports from your supplier for documented values on the exact panel specification you're sourcing.
Is anti-slip the same as wire-mesh?
Wire-mesh is the most common anti-slip pattern, but "anti-slip" is the broader category. Diamond mesh and crosshatch patterns are also produced as anti-slip textures. Hexagonal wire mesh is the industry default for the combination of grip, release cleanliness, and cleaning ease.
Can I order one face anti-slip and one face smooth?
Yes — that's the 1S/A configuration. Anti-slip on the working-face side, smooth on the concrete-pour side. It's the most common specification for combined-duty applications.
How does anti-slip film-faced plywood compare to grit-overlay plywood?
Wire-mesh anti-slip is integral to the cured phenolic film and won't peel, chip, or shed. Grit-overlay plywood has abrasive particles bonded to the surface as a separate layer; the overlay is typically cheaper but wears unevenly under traffic and can shed grit into formwork systems.