VinawoodVinawood *

« Shuttering Plywood India: IS 303 Grades, BIS Compliance & Contractor's Buying Guide » n'est pas encore disponible en Français

Nous n'avons pas encore traduit cette page. Parcourez tous nos Blog ci-dessous — nous traduisons davantage de contenu prochainement.

Voir tous les Blog

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

MDO 2S panel for formworkVinawood's MDO 2S Panel features a smooth overlay on both faces, suitable for concrete formwork where both sides of the panel contact wet concrete.
4×8 plywood sheetsThe 1220×2440 mm (4ft × 8ft) format is the standard shuttering panel size stocked across India.
What is shuttering plywoodStart with the fundamentals of shuttering plywood, including composition, advantages, and how it differs from regular plywood.
Advantages of film-faced plywoodUnderstand why film-faced panels outperform plain BWP shuttering ply in reuse count, concrete finish quality, and total cost per pour.

Quick Answers

What is the price of shuttering plywood in India?
Shuttering plywood prices in India vary by grade and brand. Plain BWP-grade panels from regional mills cost ₹400–700 per sheet, domestic branded film-faced panels (Greenply, CenturyPly) range from ₹900–1,500, and Vietnam-imported film-faced panels cost ₹700–1,200 at container volume. The true cost comparison should factor in reuse cycles — a ₹1,100 panel lasting 40 pours costs only ₹27.50 per use.
Is IS 303 MR grade plywood safe for shuttering?
No. IS 303 MR (Moisture Resistant) grade uses urea-formaldehyde adhesive that softens under sustained moisture from wet concrete. Using MR-grade panels in shuttering risks delamination mid-pour, panel blowout, and surface defects in the finished concrete. Always specify IS 303 BWP (Boiling Waterproof) Grade — Group 1 — for any concrete shuttering application.
Can Vietnamese plywood be used for shuttering in India?
Yes, for private commercial and industrial projects. Vietnamese export-grade film-faced plywood uses WBP phenolic adhesive technically equivalent to IS 303 BWP Grade performance. However, it does not carry a BIS ISI mark, which makes it unsuitable for government PWD/CPWD contracts where the ISI mark is contractually required. Vietnamese panels carry CARB P2 and CE certifications instead.
How do I verify if shuttering plywood is genuine BWP grade?
Three on-site checks: First, BWP-grade panels emit a distinct sharp phenolic resin odour, while MR panels smell of urea-formaldehyde (softer, ammonia-adjacent). Second, BWP panels show dark brown or black glue lines on panel edges, while MR panels show lighter cream-coloured lines. Third, check for the BIS ISI mark stamped on the panel edge or face — the licence number can be verified at bis.gov.in.