Can melamine plywood be used in wet conditions?
That depends on the glue, not on the word melamine. Plywood bonded with WBP melamine-urea-formaldehyde (MUF) glue to EN 636-2 is water-resistant and suited to humid or covered exterior service, while MR-bonded boards are meant for dry interiors. Ask for the bond class in writing and seal cut edges, because no plywood keeps water out of an open edge.
What is the difference between melamine board and melamine plywood?
Melamine board usually means MFC, a melamine face film over a chipboard or MDF core. Melamine plywood keeps a cross-laminated wood core instead. That core holds screws better, gives a cleaner exposed edge and stays more dimensionally stable, which is why it costs more.
Is melamine stronger than plywood?
The question usually compares an MFC board with a plywood one, since melamine is a resin rather than a core material. On strength and screw-holding, a plywood core wins. For a flat, prefinished and low-cost surface in dry furniture, MFC is hard to beat, so match the core and the surface to the load and the exposure.
What is the difference between melamine and phenolic plywood?
It is a difference in exposure class rather than a quality ranking. MUF glue is rated EN 636-2 for humid and covered exterior use, while phenolic (PF) glue is rated EN 636-3 for full exterior service and higher pour counts. In our formwork range Eco Form Plus, Form Basic and Form Extra use MUF glue, and Pro Form, Pro Form Lite, HDO Standard and HDO Premium use phenolic.
How many times can melamine formwork plywood be reused?
Form Basic is rated up to 10 pours and Form Extra up to 15, both as maximums with proper handling. Form Extra reaches the higher figure through a stronger Superior Glue MUF line rather than a different face film, and it stays Class 2. Sealing every cut edge and storing panels flat and covered is what protects that count.
