VinawoodVinawood *

„Film Faced Plywood vs Marine Plywood: Which Do You Need?” nie jest jeszcze dostępny w języku Polski

Nie przetłumaczyliśmy jeszcze tej strony. Przeglądaj wszystkie nasze Blog poniżej — wkrótce przetłumaczymy więcej treści.

Zobacz wszystkie Blog

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Quick Answers

Is film-faced plywood water-resistant enough for outdoor formwork?
Yes, for formwork, where the panel gets wet during a pour and dries out again before the next one. The phenolic face film and the exterior WBP glue keep water out of the faces through repeated pours and rain on site. Cut edges and drilled holes are where moisture gets in, so seal them before the first pour. A panel that has to sit in water for years is a job for marine plywood rather than a pour panel.
Can marine plywood be used for concrete forms?
You can pour against it, but it is rarely the right buy. Without a film face, wet concrete grips the bare veneer, stripping scars the sheet and the wall, and the wood grain prints into the concrete. Marine plywood also costs more at the same thickness and wears out faster on a pour cycle than a cheaper film-faced sheet.
Which is cheaper, film-faced or marine plywood?
Film-faced plywood is usually cheaper per sheet at the same thickness. Marine plywood costs more because every ply is selected for a void-free core that can stay wet for years. On a formwork job the fairer comparison is cost per pour, and a film-faced panel that is stripped on time and stored flat wins that comparison comfortably.
What is the difference between formply and marine ply in Australia?
Formply is the Australian name for film-faced formwork plywood, and it is stress-graded under AS 6669, most often to F17. Marine ply answers to a different standard, AS/NZS 2272, which looks at core quality and the glue bond rather than pour performance. When comparing formply offers, the useful checks are the F-grade, the film and the reuse rating rather than the name on the sheet.
Which bond class do Vinawood's film-faced grades meet?
Eco Form Plus, Form Basic and Form Extra are EN 636-2 Class 2 panels for humid conditions and standard formwork, with Form Extra using a more durable glue and rated for up to 15 reuses. Pro Form Lite, Pro Form, HDO Standard and HDO Premium use phenolic glue and meet EN 636-3 Class 3. HDO Basic sits in Class 2. If the engineer's spec calls for Class 3, a Class 2 grade should not be swapped in.
What is film-faced plywood used for besides formwork?
Its hard, smooth face makes it a practical sheet for trailer flooring, workbench tops and site hoarding. Those are jobs where a tough surface matters and the panel is not expected to last forever. Marine plywood remains the choice for boats, docks and other structures that stay wet for long periods.
Film Faced Plywood vs Marine Plywood: Which Do You Need? — Vinawood