VinawoodVinawood *

컬렉션

필름 페이스 합판 - 페놀 합판

Vinawood의 필름 페이스 페놀 합판은 까다로운 거푸집 작업에 이상적입니다. 페놀 필름으로 코팅되어 매끄럽고 내구성이 뛰어난 표면을 제공하며, 우수한 콘크리트 마감 처리를 보장합니다. 뛰어난 수분 저항성과 여러 번 재사용할 수 있는 기능으로, 건설 프로젝트에 비용 효율적인 선택입니다.

이 컬렉션의 제품 10개

Eco Form 2440x1220x12 mm — 필름 페이스 합판 - 페놀 합판

Products

Click any product for full specifications, or use the variant dropdown to jump to a specific thickness or configuration.

영화면 합판(10 lines)

거푸집 제품 비교

당사 거푸집 제품군 전반의 표면, 접착 등급 및 일반적인 재사용 횟수를 확인하세요. 수치는 실제 제품 데이터에서 가져온 것으로 임의로 만들어진 것이 아닙니다.

제품표면 / 필름심재 접착제 / EU 접착 등급일반적인 재사용 횟수최적 용도다음 단계
Form BasicPhenolic Surface Film - High-gsm Standard 165 gsm · Dark BrownClass 2 · WBP Melamine Standard최대 10회Formwork
Form ExtraPhenolic Surface Film - High-gsm Standard 165 gsm · Dark BrownClass 2 · WBP Melamine Top최대 15회Formwork
Pro Form LitePhenolic Surface Film - High-gsm Standard 165 gsm · Dark BrownClass 3 · WBP Phenolic최대 15회Formwork
Pro FormPhenolic Surface Film - Top grade 125 gsm · Dark BrownClass 3 · WBP Phenolic최대 20회Formwork
HDO Basic 2S FormplyHDO Basic Coating · HDO Basic CoatingClass 2 · Exterior Basic Glue최대 10회Formwork
MatteFace Panel 2SMatteFace Surface 325 gsm · Kraft Paper Color Light BrownClass 3 · WBP Phenolic최대 25회Formwork
Eco Form PlusPhenolic Surface Film - High-gsm Standard 165 gsm · Dark BrownClass 2 · WBP Melamine Standard최대 8회Formwork

재사용 횟수 및 접착 등급은 당사의 실제 제품 데이터에서 가져온 것입니다. 패널은 내수성 WBP 접착제 시스템을 사용합니다.

거푸집 재사용 계산기

실제 공장 제품 카드의 표면 제품군 및 두께를 예상 재사용 범위와 매핑합니다.

추정치는 각 제품 카드에 게시된 재사용 수치를 사용합니다. 실제 사이클은 현장 조건 및 취급 방법에 따라 달라집니다.

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Quick Answers

What is film faced plywood?
Film faced plywood is a plywood panel with a phenolic resin film pressed onto both faces, used as a reusable mold for poured concrete. The film keeps wet concrete off the wood veneer, so the sheet strips clean and leaves a smooth cast face. Buyers and tenders also call it phenolic film faced plywood, shuttering plywood or formwork plywood.
How are Vinawood film faced plywood grades built?
Both reference grades start with an Acacia and Eucalyptus hardwood core. Form Basic carries 165 gsm phenolic film on both faces with WBP melamine (MUF) glue rated EU Class 2 under EN 636-2, while Pro Form carries 125 gsm top-grade phenolic film with WBP phenolic glue rated EU Class 3 under EN 636-3. Face film and glue line are separate choices, so a good RFQ names both.
Which film faced grades are Class 3 and which are Class 2?
Pro Form, Pro Form Lite, HDO Standard and HDO Premium use phenolic glue rated EN 636-3 Class 3, which suits long programmes with repeated wet pours. Eco Form, Eco Form Plus, Form Basic and Form Extra use MUF glue rated EN 636-2, and HDO Basic is Class 2. Film colour does not tell you the bond class, so ask for it in writing on the quote.
Is film faced plywood water-resistant?
Yes, film faced plywood is water-resistant, although it is not meant for permanent submersion. The phenolic film sheds wet concrete and site rain, and a WBP (weather and boil proof) glue line holds the veneers together through wet cycles. Cut edges and tie holes still take on water, so crews should seal them after every site cut.
How many times can film faced plywood be reused?
Reuse depends on grade and site care, so the mill states it as a maximum rather than a promise. Form Basic is rated for up to 10 pours and Pro Form for up to 20. Release agent, sealed edges and flat, covered stacking decide how close a crew gets to that figure.
What sizes are available and how do I get a quote?
Form Basic and Pro Form both run in 2440×1220 and 2500×1250 mm sheets at 12, 15, 18 and 21 mm. Vinawood has made plywood since 1992 and ships manufacturer-direct to importers, distributors and formwork contractors in 55+ countries. The mill does not publish list prices, so send grade, thickness, sheet size, quantity and destination port through the contact form for a quote.