“Concrete Formwork Plywood: Advantage, Type & How To Choose” is nog niet beschikbaar in Nederlands

For most wall and slab formwork, 18 mm film faced plywood is the standard choice because it balances stiffness, weight, and cost. Thinner 12 mm panels are used for curved or lightweight forms, while 21 mm panels are chosen when stud/joist spacing is wider or heavier concrete pours are expected.

Reuse counts depend on grade, handling, and cleaning between pours. Economy film faced panels typically deliver up to 10 reuses, mid-range phenolic film faced panels up to 20, and HDO premium panels up to 50 when properly maintained. Damage, nail holes, and edge swelling are the most common reasons panels are retired early.

The terms describe the same product category — panels used as the face of concrete formwork. 'Shuttering plywood' is more common in India, the UK, and the Middle East, while 'concrete forming plywood' or 'form ply' is more common in North America and Australia. Specifications and grades still vary by region and standard.

Yes. Even high-quality phenolic film faced panels perform better with a form release agent applied before each pour. Release agents reduce surface bonding, protect the film, and extend usable reuse cycles by minimizing mechanical wear during stripping.