VinawoodVinawood *

“HDO Plywood: Overlay Grades, Reuse Cycles and Where to Source It” is nog niet beschikbaar in Nederlands

We hebben deze pagina nog niet vertaald. Bekijk al onze Blog hieronder — we vertalen binnenkort meer inhoud.

Bekijk alle Blog

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Quick Answers

What is HDO plywood?
HDO plywood is a concrete forming panel with a resin-impregnated fibre overlay hot-pressed onto one face or both. The overlay grade, more than thickness, sets how glossy the cast face is and how long the sheet lasts under scrape and pour cycles. Vinawood's ladder runs from HDO Basic on a Class 2 (EN 636-2) bond up to HDO Standard and HDO Premium on a phenolic Class 3 (EN 636-3) glue line.
How many times can HDO plywood be reused?
Vinawood rates HDO Basic at up to 10 reuses and HDO Standard, Premium and Premium HD at up to 20. Those figures are ceilings under decent site care: a thin form release every pour, cut edges resealed, faces cleaned at strip, and stacks kept flat and covered. Miss those habits and even a Premium sheet wears out early.
What is the difference between HDO and MDO plywood?
HDO carries a dense fibre overlay that casts a glossy, closed concrete face for architectural pours. MDO as a search term usually means North American kraft-paper panels made for paint and signs, though formwork buyers also type it when they want a matte phenolic face. Vinawood's formwork sheet for that matte finish is MatteFace Plywood (MTF), so write MatteFace on the RFQ for matte and HDO when the finish should be glossy.
What sizes and thicknesses does HDO plywood come in for concrete forms?
Most HDO form panels are sold in the 4 × 8 ft format, which a metric mill writes as 2440 × 1220 mm, and in forming thicknesses near 5/8 and 3/4 inch. Vinawood lists its HDO range at 2440 × 1220 mm in 12, 15 and 18 mm, and HDO Standard HD 1SF is also made at 25 mm for heavier wall and column pours. Thickness tolerance follows EN 315, so an 18 mm sheet is checked to +0.7 / −0.9 mm rather than taken from the label. If the job runs smaller wall-form panels, such as 2 × 5 ft inserts, write the cut size on the RFQ and ask how the cut edges will be sealed.
What should an HDO plywood datasheet show before you buy?
A usable HDO datasheet names the overlay grade, the face count (1SF or 2S), the bond class, the sheet size and thickness, and the reuse rating written as up to N under stated site care. On our range that means HDO Basic at up to 10 reuses on Class 2, and HDO Standard, Premium and Premium HD at up to 20 on Class 3. If any of those lines is missing, ask for the grade leaflet before you compare prices.
Where do contractors buy HDO plywood for formwork?
Repeat glossy formwork is usually bought as a mill pack or through a specialty plywood distributor that can show mill test reports and a grade leaflet. Big-box and lumberyard aisles sell cut sheets for one-off pours, and grade documents are often missing there. Ask for the overlay grade and bond class on the quote, then send a factory-direct RFQ through the contact form when the programme needs a full container.