VinawoodVinawood *

“What Is MDO Plywood? Properties, Uses, Grades & When to Choose It” is nog niet beschikbaar in Nederlands

We hebben deze pagina nog niet vertaald. Bekijk al onze Blog hieronder — we vertalen binnenkort meer inhoud.

Bekijk alle Blog

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Quick Answers

What does MDO plywood stand for?
MDO stands for medium-density overlay. In North American lumber yards that usually means exterior plywood with a resin-saturated kraft-paper face pressed onto one or both sides so paint holds and the grain does not show through. Sign shops and trim carpenters treat that paper-faced panel as the default paint-grade sheet. Contractors who ask for MDO formwork plywood are often using the same search words for an overlay panel built to take wet concrete, which is a different job than paint-grade sign board.
What is the difference between MDF and MDO plywood?
MDF is a board of compressed wood fibre with no veneer layers, so it machines cleanly for indoor doors and mouldings but does not cope with weather or wet concrete. MDO is real plywood with cross-laminated veneers, an exterior glue line and a paper overlay on the face. If the panel will be painted outdoors or used against a pour, MDO is the better fit, and MDF should stay indoors.
What is the difference between 1-step and 2-step MDO?
One-step MDO gets its paper face in the same press cycle that glues up the plywood, which keeps the cost down but can let a small core void show faintly through the face. Two-step MDO is pressed and sanded as plywood first and then overlaid in a second press run, so the face comes out flatter and more even. Ordinary paint-grade site work is fine with 1-step, while premium signs and cladding usually justify 2-step.
Can MDO plywood be used for concrete forms?
Some MDO is made for concrete, and some is not. APA lists MDO Concrete Form as its own panel grade, separate from the general-purpose paper overlay sold for paint and signs. Kraft-paper MDO can take a short run if the face is sealed, but the paper scuffs and drinks release oil as the pour count rises. When a crew wants a matte concrete face over many pours, buyers often search for MatteFace as MDO formwork plywood: a matte phenolic surface film panel rather than kraft paper, with Panel 1S and 1SF rated up to 15 reuses, HD 1SF up to 17, Panel 2S up to 25 (all Class 3), and Eco 1SF a Class 2 panel rated up to 6.
What is the difference between MDO and HDO plywood?
HDO carries a much harder, denser resin overlay that casts a smooth glossy face and is made to be stripped again and again. Our HDO Basic is a Class 2 panel rated up to 10 reuses, while HDO Standard and HDO Premium are Class 3 and rated up to 20. Kraft-paper MDO has a softer face aimed at paint, so it is the panel for signs and trim, with only a limited forming life.
Does MDO plywood hold up to water?
MDO is water-resistant rather than watertight. Rain runs off a sealed, painted face and the exterior glue line holds up outdoors, but a fresh saw cut soaks up moisture quickly. Prime or seal every cut edge the same day, and a painted panel can stay outside for years.