VinawoodVinawood *

“Anti-Slip Film-Faced Plywood: Specs, Use Cases & How It's Made” is nog niet beschikbaar in Nederlands

We hebben deze pagina nog niet vertaald. Bekijk al onze Blog hieronder — we vertalen binnenkort meer inhoud.

Bekijk alle Blog

Curated by Vinawood

Dive Deeper Into This Topic

Related Reading

Quick Answers

What is anti-slip film-faced plywood?
Anti-slip film-faced plywood keeps a phenolic-bonded core and presses a hexagonal wire-mesh into the face film during the final hot-press. Grip comes from the cured shape of the film, not from grit glued on top, so the texture flattens under boots and wheels instead of chipping off. Most RFQs call either 2S (anti-slip both faces) or 1S/A (anti-slip on the traffic face, smooth on the concrete side).
Does the anti-slip texture wear off?
It wears by flattening, not by peeling. The raised mesh ridges lose height under foot traffic and equipment loads across the panel's reuse life. When the imprint is about half its original depth, retire that face from anti-slip duty; on a 1S/A build the smooth face can often still pour.
Can I order one face anti-slip and one face smooth?
Yes. That is the 1S/A configuration: anti-slip on the working face and smooth on the pour face. It is the usual pick when the same sheet has to carry boots on one side and release concrete on the other. Spec thickness, size and bond class the same way you would for smooth Pro Form.
How does reuse compare to smooth film-faced plywood?
Reuse follows the parent grade, not the texture. Smooth Pro Form tops out at up to 20 under good site practice, and Pro Form Anti-Slip sits on that same PF Class 3 parent. Cleaning is the practical difference: smooth takes a wipe, while anti-slip needs a brush because dust packs into the mesh recesses.
Where is anti-slip film-faced plywood specified?
Anywhere boots and wheels share a wet or dusty sheet. Scaffold platforms, bridge falsework, traveler decks, inclined ramps for rebar and form parts, and pedestrian tops on slab-edge or climbing-form packs are the common draws. Pour faces and fair-face walls still prefer smooth film; traffic decks are where the wire-mesh earns its keep.
Where does Pro Form Anti-Slip sit on the Vinawood ladder?
Anti-Slip is a textured-face variant of Pro Form, so it inherits PF Class 3 writing and the same bond-class check as smooth Pro Form. Class 3 on the mill ladder is Pro Form, Pro Form Lite, HDO Standard, HDO Premium and MatteFace Panel 1S / Panel 2S / 1SF / HD 1SF. Class 2 covers Eco Form Plus, Form Basic, Form Extra with a more durable glue, HDO Basic and MatteFace Eco 1SF. Call the panel water-resistant WBP, seal the edges, and write 1S/A vs 2S on the RFQ.