Welcome to Vinawood Canada. Bienvenue! 🍁

Tel: +1-437-800-2333 | Email: andy@vinawoodltd.com

19/32 Plywood Actual Size

19/32 Plywood Actual Size

Plywood is one of the most widely recognized multi-purpose engineered wood-based panel products used in construction projects. With a large amount of total production a year, plywood is most often used as a wood packaging material for transporting products, other timber, etc… It can be used in the production of crates, pallets and skids. Plywood can be used for various purposes so it has many sizes and thickness. Knowing about the dimensions of plywood help you choose the appropriate plywood for your project. Here, Vinawood will give you information about the 19/32 plywood sizes and give you advice on what project would work best.

What are the dimensions and thickness of 19/32 plywood?

Each project will require different dimensions and thickness of plywood so understanding plywood sizes will help you get the best choice for your work. The dimensions of plywood depend on its types:

Plywood is most often sold in 4′ x 8′ sheets, but may also be available in 4′ x 10′, 4′ x 12′, or 2′ x 4′ sheets. Hardwood plywood (e.g. birch, maple, oak, cherry, etc.) is often available in 4′ x 8′, 5′ x 5′, and 2′ x 4′ sheets.

Softwood plywood may be thicker than hardwood plywood, due to the need for additional plies to lend stability and structure to the sheet.

MDF, or medium-density fiberboard, is another sheet good that is sold in 4′ x 8′ sheets. Usually, the actual dimensions of an MDF sheet are oversized by one inch, and the full sheet is typically 49″ x 97″.

The thickness of 19/32 plywood is approximately 0,587 inches or about 15.08 mm.
> Read more: plywood sizes, 3/4 plywood, 4×8 plywood, 1/2 plywood, 5/8 plywood, 1/4 plywood

Actual size of plywood
Actual size of plywood

Is 19/32 plywood durable?

The durability of 19/32 plywood depends on its grade and quality. Higher grades typically indicate fewer imperfections such as knots and voids, which can weaken plywood overtime. Also, it is due to application suitability and installation practices. The installation practices includes ensuring the plywood is securely fastened to the framing, joists are adequately sealed to prevent moisture ingress and following manufacturer guidelines for spacing and fastener types. When being used for subfloor sheathing and roofing, ensuring that it meets local building code and manufacturer specifications for load-bearing capacity and environmental exposure to maximize the lifespan. Maintenance is key to preserving the durability of 19/32 plywood. You should inspect the damage, keep the plywood clean and free from debris that could potentially trap moisture and lead to decay.

How much weight can 19/32 plywood hold?

Many people may wonder how much weight could 19/32 plywood hold when they purchase plywood. This is mainly because plywood, although it’s very suitable, doesn’t look like much at first glance. However, you might be surprised because plywood is not a lot stronger than it seems. The thickness of plywood makes the difference when it comes to the weight bearing and strength, for instance, a 12-inch by 36-inch cut of plywood with a thickness of ¼ inch will support a weight of five pounds while a 12-inch by 36-inch cut of plywood with a thickness of ¾ can support up to 50 pounds.But generally, this is a simplified chart to give you an idea of its strength:

On center measurement Thickness of plywood Weight Capacity
16 oc 19/32 185 pounds
24 oc 19/32 270 pounds

What are the uses of 19/32 inch plywood?

As the durability and many features of plywood mentioned before, it is possible to apply 19/32 plywood for interior and exterior applications such as furniture, soffits, stairs, shelving, paneling and DIY projects. Besides, you can also use it for projects you want if it meets the requirements of your project. If you want to make sure whether the plywood you use is correct or not, connect to the expert in this field to get the proper answer. Vinawood is the possible option for you, contact us to get the information.
> Explore further: MDF vs Plywood, Particle Board vs Plywood, OSB and Plywood, plywood ceiling

19/32 in. x 4 ft. x 8 ft Sheathing Plywood
19/32 in. x 4 ft. x 8 ft Sheathing Plywood

Can 19/32 plywood be used for the subfloor?

As we mentioned before, 19/32 plywood is approximately 15.08 mm thick, which is more than a half inch. This thickness is suitable for subflooring in residential construction, especially when the joist spacing is 16 inches on center. Pay attention at the plywood rate, if it is exposure 1 or exterior-rated, it can be used for subflooring due to its strength and stability. Also, proper installation is crucial, the plywood should be securely fastened to the floor joists, with edges staggered to enhance strength and stability. Provided that your plywood meets the requirements of local building code and is installed correctly.

Can 19/32 plywood be used for roofing and sheathing?

Roof sheathing comes in grid-marked by 4-by-8 foot sheets and needs to be installed perpendicular to the frame. 19/32 plywood can be used for roofing and sheathing because the thickness of plywood provides adequate strength and rigidity for roofing and sheathing, especially when spaced and installed correctly. For roofing, this plywood is commonly used as roof decking or sheathing beneath roofing materials such as asphalt shingles, metal roofing or tile. It can provide a stable base for these materials and helps distribute load across the roof structure.
> Read more: laminate flooring, hardwood flooring, baltic birch plywood, maple plywood, ACX plywood, BBOES plywood

What size screws for 19/32 plywood?

This can be considered due to the factors such as screw material, lateral, shear forces and the presence of pilot holes. For length, when doing a subflooring project, the screw length should be sufficient to penetrate through the plywood and into the joist by at least 1 inch. Screws that are 1.5 to 2 inches long are typically appropriate.

Plywood sizes can range depending on what type of wood is being used, the grade of the plywood, and what it is being purchased for. Depending on your exact needs, will determine which plywood sizes would work best for your business and supply chain.Remember that, the loss of thickness that naturally occurs during the plywood manufacturing process.
> Discover more: furniture grade plywood, plywood underlayment, shuttering plywood, concrete forming plywood

What size screws for 19/32 plywood?
What size screws for 19/32 plywood?

Plywood is just one small piece of the puzzle of getting products to where they need to go. Vinawood has over 40 years of experience being a leading supplier in the packaging industry. We provide standard-size and custom pallets for our customers in multiple industries. Along with crates and integrated industrial packaging.

Working with Vinawood can help you get the most out of your transportation packaging. Reach out to our team of knowledgeable and experienced staff to see how we can help you today!
> Learn more: