Make Chic Modern Outdoor Christmas Trees With Plywood & Paint

Hgtv – Love modern Christmas decor? Host Jason Pickens has the perfect project for you! Instead of the same cutesy outdoor decorations, you can make these seriously chic Christmas trees with just two pieces of plywood! Yep, all you need is two pieces of scrap wood and a free afternoon. Read on for the how-to and deck your yard with this super trendy DIY.

Three Plywood Christmas Trees in Varying Heights Displayed on Porch — You Can Make These Chic, Modern Outdoor Christmas Trees With Plywood and Paint 16

Cassidy Garcia

Materials Needed

2 4’ x 8’ sheets of plywood
tape measure
circular saw
safety glasses
ear protection

painter’s tape
paint roller
drill
1 ⅝ inch drywall screws

Start with a 4’ x 8’ sheet of plywood. For the larger tree, mark a center mark at two feet. From the center mark, draw a line to each corner at the bottom of the sheet of plywood. For the medium tree, make a 6-foot mark. Mark a center mark at two feet. From the center mark, draw a line to each corner at the bottom of the sheet of plywood. With the remaining 2’ x 4’ section of plywood, measure and mark the smallest tree. Make a mark in the center of the piece at one foot. From the center mark, draw a line to each corner at the bottom of the section of plywood. Repeat above steps for the second 4’ x 8’ sheet of plywood. Using a circular saw, cut the plywood along the marked lines.

Using a tape measure, mark the plywood with a marker. — You Can Make These Chic, Modern Outdoor Christmas Trees With Plywood and Paint 17

Cassidy Garcia

Measure the wood and make markings for each tree. — You Can Make These Chic, Modern Outdoor Christmas Trees With Plywood and Paint 18

Cassidy Garcia

Using a saw, cut the plywood at the marked lines. — You Can Make These Chic, Modern Outdoor Christmas Trees With Plywood and Paint 19

Cassidy Garcia

The triangular pieces of plywood will be assembled standing upright to resemble a tree. — You Can Make These Chic, Modern Outdoor Christmas Trees With Plywood and Paint 20

Cassidy Garcia

To create and paint a 3D tree design, use a piece of card stock to mark the tree edges. Fold the piece of card stock in half. Mark the edges and move the piece of paper up the side of plywood, marking each triangle tree edge. Repeat on both sides. Using painter’s tape, tape along the marked lines. Using a roller, paint inside the taped-off area with an exterior paint. Remove painter’s tape and set aside to dry. Paint a second coat if desired. Set aside to dry. Repeat above steps for each tree or create your own painted design!