Blog
Industry insights, how-to guides, and the latest news from the world of plywood and wood products.
Concrete Dusting: Why Slab Surfaces Go Powdery and How to Stop It
Concrete dusting is a weak, powdery surface layer that rubs off under traffic. It comes from bleed-water finishing, poor…
Concrete Cold Joints: Causes, Prevention & When They Matter
A concrete cold joint forms when a pour delay lets one lift set before the next is placed, so the two never bond. It is…
Board-Formed Concrete: How the Form Face Shapes the Finish
Board-formed concrete gets its character from the timber boards it is cast against. This guide covers how the finish is…
Concrete Spalling: What Causes It, How to Repair It, and How to Prevent It
Concrete spalling is surface concrete flaking or breaking away, exposing aggregate or rebar. It is a post-cure…
Bug Holes in Concrete: What Causes Them and How to Prevent Them
Bug holes are small surface air voids on a concrete face, driven mostly by the mix, vibration and release agent rather…
Honeycomb in Concrete: Causes, Prevention, and Where Formwork Fits
Honeycombing is rough, voided concrete where mortar failed to fill around the aggregate. Here are the real causes, how…
Fair-Faced Concrete: How Formwork and Panel Choice Drive the Finish
Fair-faced concrete copies the form face. Map glossy phenolic, MatteFace matte film, HDO and P-Form polypropylene, keep…
Lumber and Freight Firm as Plywood Demand Splits in June 2026
Lumber and freight firmed in late June 2026 even as US housing starts slid, while Chinese and EU demand kept Vietnamese…
Single-Sided Formwork: How One-Sided Wall Forming Works — and Where the Plywood Sits
Single-sided formwork casts a wall with access on one side only. How the bracing carries the concrete pressure without…
Permanent Formwork (Stay-in-Place): How It Works, When It Pays — and When Reusable Wins
Permanent (stay-in-place) formwork stays cast in the pour instead of being struck and reused. What the material families…
Plywood in Tunnel Formwork: Where the Steel System Ends and the Plywood Begins
Tunnel formwork is a steel system, and most guides stop there. This one shows where plywood actually fits on a…
Plywood for Table & Flying Formwork: Choosing the Deck Panel That Survives the Cycle Count
Table and flying formwork carries the building's most repetitive slab pours — and the deck taking every cycle is…